FTTH and termination boxes

Fiber-To-The-Home (FTTH)

The ever-growing need for communication sets harder and harder requirements for telecommunication services. The most reliable way to ensure that there is enough bandwidth and stability in the network for end-users, is to use optical fibers.

Naficon provides excellent solutions for building such a network. For more information about different product package solutions, please visit our product catalogue.

Termination boxes for premises

In our selection you can find both metallic and plastic termination boxes to be installed inside the premises. The boxes are available empty, with pigtails preinstalled or with a white indoor-/outdoor cable (FTMSU) preinstalled. The length of the cable can be customized to needs, but the length in stock is 5, 15 and 30m.

NAF SPK kuiturasia

  • Identification code 7264899
  • Plastic indoor termination box for 2 to 4 fibers
  • External dimensions 115x85x20mm (HxWxD)
  • Colour is white
  • Alternatives for adapters: SC duplex / LC quattro. There are also similar casings available for SC simplex / LC duplex on request.
  • Inlet for cables are located on both sides and in the front
  • There is a turning see-through cover protecting adapters and patch cords

 

NAF SPK kuituboksi

  • Identification code 7263182
  • External dimensions 105x82x24mm (HxWxD)
  • Inlet for cables from above or below
  • Plastic indoor termination box for 2 (SC) to 4 (LC) fibers
  • There is a possibility to install 2 SC-simplex or LC-duplex adapters

 

NAF SPK kuiturasia leveä

  • Identification code 7268301
  • Plastic indoor termination box
  • External dimensions 80x120x20mm (HxWxD)
  • Colour is white
  • There is a possibility to install 1 or 2 SC-simplex or LC-duplex adapters, 1 or 2 SC-duplex or LC-quattro adapters
  • Inlet for cables are located on both sides and in the front

 

NAF Talopäätekotelo

  • Identification code 7264840
  • External dimensions 140x120x40mm (HxWxD)
  • Metallic indoor termination box
  • Shielded inside the box you can find places for adapters, 4 SC-simplex or LC-duplex
  • Cable inlets are located at the bottom (2) and at the top and at the rear.
  • The package includes: The box with adapter and grounding plates, one cable gland M20, splice holder for 12 fibers, one rubber grommet and cable ties and screws to lock the cable in place
  • At the bottom and on the right side there are grooves for patch cords
  • Can be used as a splice closure when adapter-plate is removed. The identification code for such a splice closure is 7264858

 

NAF Päätekotelo 4/8

 

  • Identification code 7264874
  • External dimensions 100x100x40mm (HxWxD)
  • Metallic indoor termination box with adapter slots at the bottom for four SC-simplex or LC-duplex adapters
  • Cable inlet at the bottom or at the rear
  • The package includes: The box with grounding plates, one cable gland M20, splice holder for 12 fibers, screws to lock the cable in place and fiber guides.
  • The colour is white

 

NAF päätekotelo 2/4

 

 

  • Identification code 7269276
  • External dimensions 100x100x40mm (HxWxD)
  • Metallic indoor termination box with adapter slots at the bottom for two SC-simplex or LC-duplex adapters
  • Cable inlet at the rear
  • The package includes: Splice holder for 12 fibers, cable ties to lock the cable in place and fiber guides.
  • The colour is white

The housing combines the properties of the NAF Päätekotelo 4/8 (7264874) and the NAF SPK kuiturasia (7264899). The housing is made of aluminum, but for metal-free cables. Therefore, there is no grounding plate in the housing. The cable is brought from the rear, through the wall, into the housing. The wall mounting of the housing is done through the holes in the rear. Adapters can be UPC or APC adapters or one of both. There is more installation space in the housing than in plastic enclosures.

NAF päätekotelo 6/12

 

  • Identification code 7269277
  • External dimensions 140x145x40mm, (HxWxD)
  • Metallic indoor termination box with adapter slots at the bottom for six SC-simplex or LC-duplex adapters
  • Two cable inputs at the bottom, one at the top and one at the rear
  • There are securing loops for attaching more rigid cables at the rear
  • The package includes: The box with grounding plates, one cable gland M20, splice holder for 12 fibers, one rubber grommet and cable ties and screws to lock the cable in place.
  • Can be used as a splice closure
  • Colour white

 

NAF päätekotelo 12/24 

 

 

  • Identification code 7269278
  • External dimensions 142x137x52mm, (HxWxD)
  • Metallic indoor termination box with adapter slots for six SC-duplex or LC-quattro adapters on two sides
  • Two cable inputs at the bottom
  • The package includes: The box with grounding plates, one cable gland M25, splice holder for 12 fibers and splice holder for 24 fibers, one rubber grommet, grounding plate and cable ties and screws to lock the cable in place. Fiber guides and six cover plugs for SC-duplex apertures.
  • Can be used as a splice closure
  • Colour white
  • DIN-rail holder is available as an accessory

 

NAF indoor joint closure 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Identification code 7269279
  • External dimensions 243x186x52mm, KxLxS
  • For indoor installation
  • Metal casing with M25-sized openings at the bottom and upper corners
  • Casing-wide grounding and mounting strip at the bottom
  • The cover is fastened with two screws
  • The joint closure is attached to the wall from inside or outside
  • Capacity for 48 splices
  • Colour white
  • Package includes the casing, splice holder for 12 fibers (4pcs), cable ties (6pcs), 2pcs fiber guides, 2pcs pass-through bushings M25, 2pcs of grommets M25 and grounding brackets 2pcs

As it was said on top of the page, all these termination boxes are available with preinstalled pigtails or with preinstalled cables.

 

Below you see the identification codes and the product names for preinstalled metallic boxes.

 

 

And in the table below for plastic boxes

 

 

 

Outdoor boxes

  • Lukollinen päätekotelo

 

  • Termination box with a lock
  • Identification code 7263108
  • External dimensions 212x144x42mm (HxWxD)
  • White plastic box, IP65, is treated with flame retardant substance
  • Splice tray is located inside the box
  • One inlet for cable
  • Four outlets for cables, with the maximum diameter of 8mm

 

NAF ulkopäätekotelo

 

  • Identification code 7264872
  • External dimensions 176x126x76mm (HxWxD)
  • Plastic splice closure
  • The purpose of this casing is to allow cable type to be changed to another, for example direct buried cable to an indoor-/outdoor cable
  • IP67
  • The colour is gray
  • The basic package includes: Grounding plate installed in place, four rubber grommets, two at the bottom and two on the front edge, one cable gland M20 and splice holder for 12 fibers, cable ties and clamp

The casing above (NAF ulkopäätekotelo) is also available with an adapter plate, which has places for 4 SC or 8 LC connectors. The identification code for this is 7263183.

 

 

Talopäätepaketti

 

  • Identification code 7268339
  • The package includes the following products: 7264872 1pc (NAF ulkopäätekotelo), 7268336 1pc (NAF SPK SC+SCA/- FTMSU 4SMT 30m), 7268335 1pc (SC/SC FMS 1SMT 1m WHITE) and 7268334 1pc (SCA/SCA FMS 1SMT 1m WHITE)
  • The patch cords colour is white
  • NAF SPK SC+SCA/- FTMSU 4SMT 30m: two of the fibers are terminated with connectors, 1 SC-UPC and SC-APC connector. Two of the fibers are free inside the casing.

 

NAF päätejatko mikro

 

  • Identification code 7268355
  • External dimensions 290x180x92mm (HxWxD)
  • The casing is made from polycarbonate
  • For both indoor and outdoor installation, IP66
  • The casing can hold 24 splices. It can be used as an ordinary fiber joint closure or to install separate FTTH-cables inside of it (max 12pcs).
  • The basic package includes: 1 splice holder, 2 M32 cable glands (6 holes with 5mm diameter), 1 M20 cable gland, a protective cap for 12mm grounding opening, 1 copper grounding plate and wall-mounting system
  • Different types of rubber seals are available for cable glands

 

NAF Päätejatko

  

 

  • Identification code 7268354
  • External dimensions 450x350x130mm (HxWxD)
  • The frame of the casing is made from polycarbonate and the lid is made from ABS-plastic
  • For both indoor and outdoor installation, IP66
  • There is room for 5 splice trays inside (48 splices per tray)
  • It can be used as an ordinary fiber joint closure or to install separate FTTH-cables inside of it (max 16pcs).
  • The splice tray stand is located on the side. The trays do not reach the bottom, so the whole bottom is clear for fiber management.
  • The basic package includes: 1 splice tray, 2 M40 cable glands (8 holes with 6mm diameter), 2 M20 cable glands, a protective cap for 12mm grounding opening, 1 copper grounding plate and wall-mounting system
  • Accessories available are: extra grounding plate and splice trays
  • Different types of rubber seals are available for cable glands

 

 

Tiedustelu koskien

Tarjouspyyntö
Yhteydenottopyyntö
Palaute
Muu yhteydenotto

*

Nimi

*

Yritys

*

Puhelin

*

Sähköposti

*

Haluan, että minuun otetaan yhteyttä

Puhelimitse
Sähköpostitse

Kiitos yhteydenotostasi, olemme yhteydessä sinuun mahdollisimman pian!

Products

Naficon Liitin Oy

Lahdentie 7, 21660 Nauvo

SEND

Name  

*

Kiitos yhteydenotostasi!

Olemme yhteydessä sinuun mahdollisimman pian.

Enquiry concerning

Quote
Contact request
Feedback
Other contact

*

Company

*

Phone

*

Email

Enter your text here

*

I want to get
contacted via​

Phone
Email

Additional information