Preassembled 19" panels with pigtails

The pigtails are preinstalled in the panels to the adapters. The cable to be spliced is brought in from the back of the panel and the splicing is done inside the panel. The equipment includes splice holders, either for 12 or 24 splices, depending on the number of fibers inside the panel.

Preinstalled panels

Big part of our production is made of preinstalled 19” panels. The connectors can be either SC, LC or FC, both UPC and APC are available.

Preassembled panels with pigtails
 

The panels can be preinstalled with just pigtails, so the splicing is made inside the panel.

The pigtails inside the panel are 1.5m in length, so there should be plenty to work with. The splice holders are included.

The identification codes for the panels with pigtails can be seen in the table underneath. There are different identification codes for panels with and without (ilman ts.) impact protector. The impact protector for these preinstalled panels with pigtails is the one with foam pull-relief, unless customer wants the one without it. We also manufacture panels with pigtails that differ from the products in the table in accordance with the customers' wishes. Clicking the product code numbers will take you to the product page on the Finnish STK service and clicking the product name will open a picture of the product.

You can get panels, cross-connection cabinets and combo cabinets for 19" mechanics from us.