Fiber blowing machines for backbone
Fremco is a Danish company whose products are developed in close cooperation with customers, duct manufacturers and cable manufacturers. This is because Fremco wants to provide the best and most user-friendly products or fiber blowing solutions covering all dimensions of fiber, cable and duct.
MINIFLOW RAPID
Hydraulic cable blowing machine with a built-in electronic counter and cable damage safety monitoring system.
- Fiber/Cable outer diameter: 3-12mm
- Duct size (outer diameter 7-20mm
- Preparation time: 4 min
- Max speed: up to 100 m/min
- Blowing distance: up to 3500 m
MINIFLOW RAPID
Fast cable blowing
The machine is capable of installing fiber cable at a speed up to 100 m/min. and up to a distance of 3.5 km making it a compact and efficient cable blowing machine.
Robust and compact
The machine is constructed in stainless steel and anodized aluminium, which makes it suited for use under rugged conditions at cable blowing locations.
Safe installation
The MiniFlow RAPID has a unique monitoring system, which continuously monitors the pushing force applied on the fiber cable. This makes it easy to stop the process before any damage happens to the cable.
POWERFLOW RAPID
The PowerFlow RAPID is easy to operate and designed for rough conditions. This hydraulic machine can blow a large variety of larger cables, fibers and ducts.
- Fiber/Cable outer diameter: 5,5-25mm
- Duct size (outer diameter): 10-63mm
- Preparation time: 8-10 min
- Max speed: up to 80 m/min
- Blowing distance: up to 5000 m
POWERFLOW RAPID
Time saving, user-friendly design
With its user-friendly design, the PowerFlow RAPID is easy to operate. The flex block allows you to fasten the duct and cable to the machine easily without using tools. This saves you time when configurating the machine.
Tool free installation
When utilizing PowerFlow RAPID, the configuration and installation can be deployed without any usage of tools. This makes every fiber blowing job even more effective as the machine can quickly be adapted to blow different sizes of fiber/cable and ducts.
Hydraulic driven
Works together with the hydraulic Power Pack/control valve and high pressure compressor.
MULTIFLOW RAPID
MultiFlow RAPID is designed for relining of multiple micro ducts, but it can also be operated for single cables.
- Fiber/Cable outer diameter 5,5-32mm
- Duct size (outer diameter): 10-63mm
- Preparation time: 8-10 min
- Max speed: up to 80 m/min
- Blowing distance: up to 5000 m
MULTIFLOW RAPID
Effective for both for single cable and relining
This machine is very flexible as it can both be configurated for single cable and for relining. It can blow many different combinations of ducts and microducts.
Tool free installation
The configuration and installation can be deployed without any usage of tools. This makes every fiber blowing job even more effective as the machine can quickly be adapted to blow different sizes of fiber/cable and ducts saving you a lot of time.
Cable blowing with either air or water
It is possible to install microducts and fiber optic cables using either air or water. With water assisted cable floating, you can achieve optimal results, especially when installing large cables or blowing long distances.
We offer a wide range of machines and accessories covering all dimensions of fiber cables and ducts. Our machines are ideal for both inside and outside installation covering installations within FTTH, access network and backbone.
Ota yhteyttä
Thank you for contacting us.
We will get back to you as soon as possible.
Oops, there was an error sending your message.
Please try again later.
