Tools and accessories

Fiber optic visual fault locator

• 7268483, visibility 5km

• 7263179, visibility 10km

• 7263180, visibility 13-14km

• 7263181, visibility 17-18km

• Includes batteries, universal 2.5mm and 1.25mm adapters, ceramic spare ferrule, cleaning sticks and carrying casing.

• Optical Fiber Visual Fault Locator (VFL) is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in an optical network during and after installation. Its red laser shines through most yellow-jacketed fibers to help you pinpoint breaks, bends, faulty connectors, splices, and other causes of signal loss. It locates faults visually by creating a bright red glow at the exact location of the fault on single mode or multimode fibers.

Fiber optic stripper

• 7263119

• It can peel off three different sized claddings.

• There are holes for 2-3mm outer jacket, for 900µm secondary cladding and for the primary cladding. 125µm fiber is left exposed after use.

• Not intended as a electrical tool, not protected against electric shock

Kevlar scissors

• 7263117

• Specialist scissors are required to cut the Kevlar from multi-core and patch cord cables. These scissors are specifically designed with robust hardened steel and very sharp serrated blades to make the removal of Kevlar very easy. Due to the sharpness and robust design of the blades they can also be used on a multitude of other materials.

Fiber cleaver

• 7263118

• A device for precise fiber cleaving

• Designed for excellent portability and is ideal for FTTx applications.

• The 16-position blade yields 48,000 single-fiber cleaves, or 4,000 12-fiber ribbon cleaves before requiring replacement.

• Built-in scrap collector conveniently stores fiber shards until they can be safely discarded.

Ideal stripper 45-162

• 7263177

• A tool to strip cables and fiber tubes. Can be adjusted up to 1/8 inches (3.175mm)

• Besides optical cables, the strippers can be used for coaxial cable and twisted pair cables and other flexible cables.

• Includes three blades, adjustable blades on each side and at the end there is a blade for longitudinal cutting.

• The stripper is designed to strip away the outer jacket without damaging the inside. Lightweight, compact, cost-effective stripper is simple to operate.

Ideal stripper 45-163

• 7263120

• A tool to strip cables and fiber tubes. Can be adjusted from 1/8 inches to 7/32 inches (3.175-5.556mm)

• Besides optical cables, the strippers can be used for coaxial cable and twisted pair cables and other flexible cables.

• Includes three straight blades and one round one.

• The stripper is designed to strip away the outer jacket without damaging the inside. Lightweight, compact, cost-effective stripper is simple to operate.

Focus connector service tool

• 7262596

• Specially designed for servicing fiber optic cable connectors in high-density patch panels. Focus tool makes it easy to insert and remove connectors without disturbing adjacent connections. Its patented design makes it truly unique in the industry.

• The FOCUS tool works with the follow fiber optic connector types: SC, SC2, MU, LC, and MTRJ connectors and different cables, including 2mm, 3mm, 1.6mm, jacketed, and 900um buffered cables. It is designed for accessing high-density patch panels.

• There is a light inside which makes it easier to work in dark spaces.

Ferrulemate cleaning tool for 1.25mm ferrules

• 7262597

• Cleaning tool for LC and MU connectors

• The cleaning is done through adapter.

• Easy to use and palm-fitting design.

• Can be used for more than 800 connectors. The cleaning cloth cannot be changed.

Ferrulemate cleaning tool for 2.5mm ferrules

• 7262598

• Cleaning tool for SC, FC and ST connectors

• The cleaning is done through adapter

• Easy to use and palm-fitting design

• Can be used for more than 800 connectors. The cleaning cloth cannot be changed.

Handimate cleaning kit

• 7262599

• Cleaning tool for SC, FC, ST, LC, MU, LC-duplex and MU-duplex connectors

• The cleaning is done directly with the connector

• Can also be used with APC connectors

• Easy to use and palm-fitting design

• Can be used for more than 500 connectors. The cleaning cloth cannot be changed.

Cleaning sticks 1.25mm and 2.5mm

• 7263122, 1.25mm

• 7263123, 2.5mm

• The package includes 5pcs.

• Can be used to clean adapters and connectors through adapters.

PON optical power meter

• 7263121

• PON optical power meter for FTTx applications and maintenance

• This PON optical power meter can simultaneously test and estimate the signals of the voice, data, and video. It is an essential and ideal tool for the construction and maintenance of the PON projects.

• It is an essential and ideal tool for the construction and maintenance of the PON projects.

Splice protector sleeve

• 7264109 61mm long

• 7264887 40mm long

• Hot fusion tubing and stainless reinforcing steel rod.

• Keeps optic transmission properties of optical fiber

• Enhances the protection to optical fiber splices.

Splice holder

• 7268332 for 12 fibers

• 7263233 for 24 fibers

• Rubber-like holder with adhesive tape at the bottom.

• Every six openings can hold 2 or 4 splice protector sleeves.

• Fits with both 40mm and 61mm splice protector sleeves.

Splice tray 48

• 7264145

• A splice tray that can hold 48 splices. Includes splice holders and cable ties.

• Attached with hooks to a splice tray holder.

Splice tray 96

• 7269282

• A splice tray that can hold 96 splices.

• Includes splice holders and cable ties. Attached with hooks to a splice tray holder.

EasySplicer

• Identification code 7269205

• Splicing made easy and low-priced with EasySplicer MK2

• For both SM and MM fibers

• Splicing time of less than 7 seconds

• Loss estimation

• Pull-test performed on splices

• Built in oven

• Easy to use and to carry along. Perfect for the FTTH installer

Velcro fastener 200x15mm 20 pcs

• 7269019

• Soft Velcro fastener for cable and fiber management. Easy to open and close again. Does not cause unnecessary compression, and thus does not interfere with the signal. The length of the fastener is 200mm and the width is 15mm.

• The package contains a total of 20 Velcro fasteners: Green 4 pcs, Yellow 4 pcs, Red 4 pcs, Black 4 pcs and Blue 4 pcs

Branch block

• 7269028

• Branch block for branching shrinks

Multibranch shrink 1x5

• 7269029

• Multibranch shrink for the oval cable inlets of NAF general joint closures. The shrink is suitable for cables with an outer diameter of 8 - 14.8 mm.