OTHER JOINT CLOSURES OF THE NAF-FAMILY
-
NAF FTTH 24 metal joint closure, 7263492
- Product code 7263492
- The closure is so called butt joint consisting of a lower part with splice tray and a protective cover.
- Capacity for 24 splices.
- Suitable for different cable structures.
- Suitable for direct buried microducts.
- External dimensions 340 x 137 x 73 mm.
- In the flange of the lower part there is one round cable entry with an inner diameter of 17.0 mm. In addition, the flange has one oval pass-through, where a mechanical cable gland can be inserted if necessary.
- Material is acid-proof stainless steel.
- IP 68. Designed and manufactured in Finland.
-
NAF FTTH 96/192 branch joint, 7269377
- Product code 7269377
- The closure is so called butt joint consisting of a lower part with splice tray and a protective cover.
- Capacity for 96 splices and with additional splice tray (7269480) the capacity doubles to 192 splices.
- Suitable for different cable structures
- Suitable for direct buried microducts.
- External dimensions 498 x 235 x 125 mm.
- Six round cable bushings with the inner diameter of 22,9 mm in the lower flang
- Material is acid-proof stainless steel
- IP 68. Designed and manufactured in Finland
Equipment: 6 cable shrinks (34/8-200mm), 6 branch blocks, 4 shrink caps, 1 splice tray with 4 pcs of 24-fiber splice holders preinstalled, 8 pcs grounding connectors, 16 pcs mounting screws M4x12mm, 12 pcs cable ties 2,5x100mm, 3 grounding wires with connectors, 1 earthing connector M6-16mm², 3 pcs corrugated arc clips, 1 cleaning wipe and 1 silica gel bag 25g.
- Installation instruction
-
NAF OPGW joint closure, 7263252
- Product code 7263252
Suitable for different type of OPGW constructions
- Can be used as a shoreline extension, beach joint, to joint submarine cable to directly buried cable.
- Capacity for 96 splices
- Measures without the inlets 381 x 200 x 60 mm.
- Includes two OPGW-inlets and one inlet with inner diameter of 26 mm for duct or directly buried cables. According to the outer diameters of the cables, one or two cables can be imported from the cable gland.
- Material is acid-proof stainless steel.
- IP 68. Designed and manufactured in Finland.
- Pole mount stand which can be installed to a steel or wooden pole.
- Installation instructions
-
NAF branch joint, 7263300
- Product code 7263330
- Used for branching of fiber optic cables in areas where the cable is lying straight on the ground.
- Suitable for different cable structures
- Allows branching of the trunk cable into one or two cables.
- Can be opened and closed after initial installation.
- Cable glands are implemented with Roxtec's pass-through solutions.
- Capacity for 48 splices
- Dimensions 1100 x Ø 110 mm
- Colour red
- All the necessary accessories included
- Installation instructions
-
NAF indoor splice closure, 7269279
- Product code 7269279
- External dimensions 243x186x52mm, (HxWxD)
- For indoor installation
- Metal casing with M25-sized openings at the bottom and upper corners
- Casing-wide grounding and mounting strip at the bottom
- The cover is fastened with two screws
- The joint closure is attached to the wall from inside or outside
- Capacity for 48 splices
- Colour white
- Package includes the casing, splice holder for 12 fibers (4pcs), cable ties (6pcs), 2pcs fiber guides, 2pcs pass-through bushings M25, 2pcs of grommets M25 and 2pcs grounding brackets
